Contact
Series
B1.854

Swing Clamps with Sturdy Swing Mechanism

Bottom flange, position monitoring optional
double acting, max. operating pressure 350 bar
Swing Clamps with Sturdy Swing Mechanism
Downloads
Catalogue sheet
Operating instructions
Information Series
Beschreibung
B 1.854 Swing Clamps with Sturdy Swing Mechanism

Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
This series obtains very high clamping forces already at 120 bar and can directly be connected to the low-pressure hydraulics of the machine tool.
An additional power unit for power workholding is no longer necessary.
With the sturdy swing mechanism and the optional position monitoring these swing clamps are particularly suitable for:

  • Automatic manufacturing systems with very short cycle times
  • Clamping fixtures with workpiece loading by handling systems
  • Transfer lines
  • Test systems for motors, gears and axes
  • Assembly lines
  • Special machine tools

 

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston.
Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading and unloading or during clamping.
The angle position of the clamping arm is fixed with a dowel pin.
The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.
The version with extended switch rod is provided for mounting of pneumatic or electrical position monitorings (accessory).

Products (696)
Loading…
body design
bottom flange (696)
clamping arm seat
cone 1:10 (696)
clamping stroke [mm]
swing stroke [mm]
total stroke [mm]
swing angle [°]
swing direction
functioning
double acting (696)
piston diameter [mm]
rod diameter [mm]
max. pulling force [kN]
max. operating pressure [bar]
350 (696)
seals
NBR (696)
hydraulic ports
pipe thread and manifold connection with O-ring (696)
position monitoring
pressure range
high pressure (696)
extended piston rod
max. clamping force [kN]
swing mechanism
sturdy (696)
overload protection device
without (696)
query of
wiper material
Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
Item no.
CAD data
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
/
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
/
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
/
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
/
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
/
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Item no.
CAD data
/
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
Properties
Loading…
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
90
swing direction
cw
swing stroke [mm]
12
total stroke [mm]
24
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
90
swing direction
cw
swing stroke [mm]
12
total stroke [mm]
24
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
24
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
24
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
24
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
24
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
ccw
swing stroke [mm]
5.025
total stroke [mm]
17.025
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
ccw
swing stroke [mm]
5.025
total stroke [mm]
17.025
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
cw
swing stroke [mm]
5.025
total stroke [mm]
17.025
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
cw
swing stroke [mm]
5.025
total stroke [mm]
17.025
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
20
swing direction
ccw
swing stroke [mm]
5.49
total stroke [mm]
17.49
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
28
rod diameter [mm]
20
max. pulling force [kN]
10.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
bottom flange
position monitoring
accessory: electrical or pneumatic
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
with
max. clamping force [kN]
8.4
swing mechanism
sturdy
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
20
swing direction
ccw
swing stroke [mm]
5.49
total stroke [mm]
17.49
wiper material
metal
clamping arm seat
cone 1:10
Accessories (47)
Item no. CAD data Description
Item no.
CAD data
Description
Angle bracket, complete for series 1843 as per data sheet B1.854
Item no.
CAD data
Description
Angle bracket, complete for series 1844 as per data sheet B1.854
Item no.
CAD data
Description
Angle bracket, complete for series 1846 as per data sheet B1.854
Item no.
CAD data
/
Description
Metallic wiper, complete for rod diameter 32 mm as per data sheet B1.852
Item no.
CAD data
/
Description
Metallic wiper, complete for rod diameter 16 mm as per data sheet B1.852
Item no.
CAD data
/
Description
Metallic wiper, complete for rod diameter 25 mm as per data sheet B1.852
Item no.
CAD data
Description
Metallic wiper, complete for rod diameter 20 mm as per data sheet B1.852
Item no.
CAD data
Description
Locking flange with pneumatic valve switching range 2 - 9 mm for size 1843, type L/M/N as per data sheet B1.854
Item no.
CAD data
Description
Locking flange with pneumatic valve switching range 2 - 9 mm for size 1844, type L/M/N as per data sheet B1.854
Item no.
CAD data
Description
Locking flange with pneumatic valve switching range 2 - 9 mm for size 1845, type L/M/N as per data sheet B1.854
Loading…