Block clamps

with / without self-locking, double acting
max. operating pressure 70 / 100 bar

Downloads

Catalogue sheet

EN DE ES FR IT

Operating instructions

Information Series

Description

B 1.8233 Block clamp

Hydraulic block clamps are particularly suitable for clamping of workpieces, that require a large free space for machining, and for applications where conventional clamps and swing clamps are too big. Especially for the machining from five sides the reduced height of the block clamp and the possibility to immerge into a horizontal bore hole for clamping are of special advantage. The block clamp with self-locking is preferably used on clamping pallets, that will be disconnected from the pressure generator after clamping. The low operating pressure of 70 and / or 100 bar allows the direct connection to the low-pressure hydraulics of many machining machines.

Products (4)

Number

Item no.	CAD data	type	functioning	max. operating pressure [bar]	seals
Item no. 1824310A	CAD data	type block clamp	functioning double acting	max. operating pressure [bar] 70	seals NBR	Properties
Item no. 1824410A	CAD data	type block clamp	functioning double acting	max. operating pressure [bar] 70	seals NBR	Properties
Item no. 1824510A	CAD data	type block clamp	functioning double acting	max. operating pressure [bar] 100	seals NBR	Properties
Item no. 1824610A	CAD data	type block clamp	functioning double acting	max. operating pressure [bar] 100	seals NBR	Properties

Accessories (3)

Number

Item no.	CAD data	Description
Item no. 3000343	CAD data	Description O-ring 8 x 1.5 mm, NBR as per data sheet B1.5091
Item no. 3300821	CAD data	Description Screw plug VSD G1/4 A max. 400 bar, as per data sheet F9.300
Item no. 3610047	CAD data	Description Screw plug VSD G1/8 A max. 400 bar, as per data sheet F9.300